The Elegoo 3D printer stopped printing in the middle
Posted: Tue Jul 30, 2024 4:29 pm
Hello,
I've encountered a problem when printing objects with more than 50 layers. Both times, the printer stopped mid-print at layer 50 and lifted the platform as if the object was finished, about 2 hours in. I tried to resume the print by pressing the pause and play button, but although the icon changes, the print doesn't resume.
Slicing- Chitubox V1.5.0 on Linux
The printer firmware - V4.2.16_LCD /1440x2560 /F2.7, which was pre-installed.
Any idea on how to avoid this problem?
I've encountered a problem when printing objects with more than 50 layers. Both times, the printer stopped mid-print at layer 50 and lifted the platform as if the object was finished, about 2 hours in. I tried to resume the print by pressing the pause and play button, but although the icon changes, the print doesn't resume.
Slicing- Chitubox V1.5.0 on Linux
The printer firmware - V4.2.16_LCD /1440x2560 /F2.7, which was pre-installed.
Any idea on how to avoid this problem?