The Elegoo 3D printer stopped printing in the middle

Subscribe to the forum to receive notifications about new posts.
Post Reply
User avatar
Shraddha
Posts: 61
Joined: Fri Jun 14, 2024 3:54 pm

Hello,

I've encountered a problem when printing objects with more than 50 layers. Both times, the printer stopped mid-print at layer 50 and lifted the platform as if the object was finished, about 2 hours in. I tried to resume the print by pressing the pause and play button, but although the icon changes, the print doesn't resume.

Slicing- Chitubox V1.5.0 on Linux
The printer firmware - V4.2.16_LCD /1440x2560 /F2.7, which was pre-installed.

Any idea on how to avoid this problem?
Top
Post Reply

Return to “3D printing”