Having Issues with I2C OLED display

Subscribe to the forum to receive notifications about new posts.
Post Reply
Mihir Fulari
Posts: 12
Joined: Fri Jul 05, 2024 10:29 pm
Contact:
Contact Mihir Fulari

I have recently completed a smart aquarium project. The whole system is controlled through a rotary encoder and 1.3 inch OLED display. I realized later into its development that it is not suggested to use long cables to connect i2c devices. I have a custom 2 meter i2c cable which I have made but it appears that there is a lot of surrounding noise getting fed into the OLED display and I am unable to properly navigate through it. Any tips on how to suppress the noise (like a faraday cage)? :?:
You do not have the required permissions to view the files attached to this post.
Top
Pr4tham
Posts: 1
Joined: Wed Feb 05, 2025 6:05 pm
Contact:
Contact Pr4tham

Hi.
those are very long wires for I2C. Generally I2C doesn't work great with high capacitances. What are the pullup resistor values for I2C being used here?
Top
Mihir Fulari
Posts: 12
Joined: Fri Jul 05, 2024 10:29 pm
Contact:
Contact Mihir Fulari

Pr4tham wrote: ↑Wed Feb 05, 2025 6:08 pm Hi.
those are very long wires for I2C. Generally I2C doesn't work great with high capacitances. What are the pullup resistor values for I2C being used here?
I am using 5k pull ups on both ends (two 10k resistors in parallel)
Top
Post Reply

Return to “General Discussion”

  • Information

  • Who is online

    Users browsing this forum: No registered users and 5 guests