Hello,
I recently purchased a Waveshare 7inch 1024×600 Capacitive Touch Display for Raspberry Pi, DSI Interface . When I tried to use it can be a black light is on but screen display not on .
Here, I have share the details
Model - Waveshare 7inch 1024×600 Capacitive Touch Display for Raspberry Pi, DSI Interface.
Link -https://robu.in/product/waveshare-7inch ... interface/
Having a Display screen issue with the Wave share
To use the "Waveshare 7-inch 1024×600 Capacitive Touch Display for Raspberry Pi with a DSI Interface," you need to follow these steps:
1. Download the pre-built image (2022-01-28-raspios-bullseye-arm32) from the https://www.waveshare.com/wiki/7inch_DSI_LCD_(C)
2. Use the Raspberry Pi Imager to write the downloaded image to your SD card.
3. Insert the SD card into your Raspberry Pi and power it on.
Once the Raspberry Pi has booted successfully, the display should function correctly.
Hope this helps you. *:)
1. Download the pre-built image (2022-01-28-raspios-bullseye-arm32) from the https://www.waveshare.com/wiki/7inch_DSI_LCD_(C)
2. Use the Raspberry Pi Imager to write the downloaded image to your SD card.
3. Insert the SD card into your Raspberry Pi and power it on.
Once the Raspberry Pi has booted successfully, the display should function correctly.
Hope this helps you. *:)