Help!! FlySky CT6B 2.4GHz is throwing some issues

[Shraddha]

I have bought a FlySky CT6B 2.4GHz 6CH transmitter with an FS-R6B receiver. The problem is I am not getting consistent PWM commands from the radio, nor is it going to total limits; thereby, I have tried programming it with the T6 configurator that came with this. Still, for channel, there is a big offset, due to which, despite giving endpoint subtrim and trim, I am not able to center on all 4 stick configurations.
Somebody, please help.

[Ferri1]

I have bought a FlySky CT6B 2.4GHz 6CH transmitter with an FS-R6B receiver. The problem is I am not getting consistent PWM commands from the radio, nor is it going to total limits; thereby, I have tried programming it with the T6 configurator that came with this. Still, for channel, there is a big offset, due to which, despite giving endpoint subtrim and trim, I am not able to center on all 4 stick configurations.
Somebody, please help.

Try resetting the transmitter and recalibrating the sticks using the T6 configurator. Also, make sure the trims and subtrims are set correctly, and check if the receiver is properly bound to the transmitter. If the issue persists, you might want to update or reinstall the T6 configurator software or check for firmware updates.

[Shraddha]

I tried. Still, the issue is not resolved. Is there any other way I could fix this?